Blade Fusion 360 BNF Basic helikopter. TAGES HJEM PÅ BESTILLING.

Blade Fusion 360 BNF Basic helikopter. TAGES HJEM PÅ BESTILLING.

4.350,00 DKK

Model/Varenr.: BLH5250

Video.

 

 

Needed to Complete

Full-range 6+ channel Spektrum™ 2.4GHz DSM2®/DSMX® Transmitter

Gen2 or iX12 required for Telemetry and Forward Programming Features

22.2V 6S 1300-1800mAh 30C LiPo Flight Battery

Suitable LiPo Balancing Charger

What's in the Box?

(1) Factory Assembled Blade Fusion 360 helicopter with:

(1) 350mm Carbon Fiber Main Rotor Blade

(2) 65mm Composite Plastic Tail Rotor Blades

(1) Spektrum 6250HX Flybarless Flight Controller

(1) Spektrum 4649T 2.4GHz DSMX® Receiver with Telemetry

(1) Brushless Outrunner Motor, 1800Kv

(1) Brushless 60A ESC

(3) Sub-Micro Digital Metal Geared Heli Cyclic Servos

(1) Sub-Micro Digital Metal Geared Heli MG Servo

(1) Product Manual

Everything expertly tuned by our team of pilots and developers!

 

Approximate Assembly Time:  No assembly required

Approximate Flight Time: 4 minutes

Battery: 6S 1300 - 1800mAh required

Canopy/Body Material: Fiberglass

Channels: Full range 6-channel DSM2/ DSMX transmitter required

Completion Level: Bind-N-Fly Basic

Flying Weight: 915g

Height: 190mm

Length: 685mm

Main Blade Material: Carbon

Main Motor Type: Brushless Outrunner

Main Rotor Blade Length: 350mm

Main Rotor Diameter: 796mm

Main Rotor Head Type: Collective pitch (CCPM) flybarless

Pinion Size: 11 tooth

Pinion Size (Range): 11 to 12 tooth

Servos: Swash Servos, Spektrum 3055 MG, Tail Servo, Spektrum 3065 MG

Skill Level: Level 3

Swashplate Type: 120 degree CCPM

Tail Drive: Belt Drive

Tail Ratio: 4.59:1

Tail Rotor Diameter: 175mm

Width: 90mm

 

Key Features

BNF Basic Convenience

2221 - 1800Kv Brushless Outrunner Motor

Spektrum™ 6250 HX Flybarless Controller With Two Remote Receiver Ports

6S Power System Provides Ballistic 3D Performance

Hobbywing 60A Platinum ESC With New IC3 Connector

Spektrum 3055 and 3065 Servos

Optimized Servo Geometry

Fiberglass Canopy and Painted Tail Fin

Carbon Fiber Landing Gear

Optimized and Lightened Main Frame

Forward Programming

CNC Main Blade Grips

Stunning Black Anodized Hardware

Large Tail Boom and New CNC Tail Case

High Visibility Fin and Trim Scheme

Improved Main Rotor Blade Design

 

Overview

Expanding on the Fusion line of helicopters, the Blade® Fusion™ 360 redefines BNF performance in a 300-sized machine. With the popular 360 size, Blade has taken a fresh approach in redeveloping the Fusion 360 by adding high-end hardware, all carbon fiber and aluminum construction, improved power system package, and more.

Cutting-edge Spektrum™ technology is featured throughout this beast from new Spektrum 3055 & 3065 servos with Optimized Servo Geometry to the new ground-breaking Spektrum 6250 HX flybarless system. This new flybarless controller features advanced adaptive flight control algorithms, forward programming, 6-axis M.E.M.S. inertial sensor, low-latency high-speed operation, two remote receiver ports for diversity, and a vibration rejecting aluminum lower case.

Pre-installed and pre-programmed in the Fusion 360 is a HobbyWing 60A Platinum ESC ready for 6S power. The 2221-1800Kv brushless outrunner motor delivers impressive headspeeds via the helical main gear for a powerful and efficient punch that's unlike anything else in this size from Blade. The new all carbon fiber and aluminum design takes frame rigidity to another level for a rock solid flight experience. The new carbon fiber main rotor blades feature an improved aerodynamic design with increases to efficiency and power. A new oversized tail boom eliminates the need for boom supports and is crowned by a new CNC aluminum tail case improving vibration damping and performance. All this combines to give pilots one of the best flying Blade models to date!

6S Power House

Pre-installed and pre-programmed in the Fusion 360 is a HobbyWing 60A Platinum ESC ready for 6S power. The 2221-1800Kv brushless outrunner motor delivers impressive head speeds via the helical main gear for a powerful and efficient punch that's unlike anything else in this size from Blade. The heli also accepts a wide range of 22.2v 6S Lipo batteries from 1300 to 1800mah.

Optimized Fusion Design

The new all carbon fiber and aluminum design takes frame rigidity to another level for a rock solid flight experience. The new carbon fiber main rotor blades feature an improved aerodynamic design with increases to efficiency and power. A new oversized tail boom eliminates the need for boom supports and is crowned by a new CNC aluminum tail case improving vibration damping and performance.

Aggressive and Attractive Trim Scheme

The Fusion 360 features a expertly painted fiberglass canopy and matching tail fin that is both attractive and purposeful. The bright color scheme is easy to see when tearing up the sky and is sure to catch the eye of everyone at the flight line.

Spektrum 6250HX Flybarless Controller

Cutting-edge Spektrum technology is featured throughout this beast from new Spektrum 3055 & 3065 servos with Optimized Servo Geometry to the new ground-breaking Spektrum 6250 HX flybarless system. This new flybarless controller features advanced adaptive flight control algorithms, forward programming, 6-axis M.E.M.S. inertial sensor, low-latency high-speed operation, two remote receiver ports for diversity, and a vibration rejecting aluminum lower case.

Titel Type Størrelse Download
BLH5250-Manual-EN.pdf PDF 1.82MB Download