Nytænkende drone der på få sekunder kan ændres til en hovercraft model.
Needed to Complete
Nothing! Everything is included.
What's in the box?
(1) Blade Inductrix Switch
(1) 2.4GHz 4-Channel Transmitter
(1) 1S 25C 150mAh LiPo Battery
(1) 1S USB Li-Po Charger
(4) AA Batteries
(1) User Manual
Approximate Assembly Time: No assembly required
Approximate Flight Time: 4 minutes
Completion Level: Ready-to-Fly
Flying Weight: 38 g
Height: 60 mm
Length: 119 mm
Main Frame Material: Plastic
Main Motor Type: Brushed
Motor Size: 6 mm
Propeller Size: 30 mm
Recommended Motor Battery: 1s 200mAh
Width: 119 mm
Hovercraft and Inductrix® all-in-one - Modular design makes it easy to change modes on the fly.
Molded plastic body makes bumps worry free
In quad mode, SAFE® Technology makes flying easy even for beginners
Blade® MLP4DSM 4CH Transmitter, 2.4GHz
Programmable LED lights
One of the most unique products on the market, the Blade® Inductrix® Switch is truly the best of both worlds. This Innovative design builds off the successful Inductrix platform with an exclusive snap-together design that quickly changes from a micro drone into a hovercraft! It's literally two vehicles in one! Hovercraft mode allows you to drive on multiple surfaces and with a simple stick command transforms into a flying drone. It takes seconds to convert with no wiring changes required. The durable molded plastic design and foam skirt can take punishment for worry-free flights and drives. Programmable LED lights make racing fun. Better yet, everything you need to start flying and driving is included in the box and a wide-variety of parts available means repairs are easy.
Switch it up!
With its unique snap-in modular design, the Inductrix Switch quickly transforms from a hovercraft to a drone in seconds. No tools required, and you don’t even have to unplug the battery!
Change the flight controller programming from drone to hovercraft with simple stick commands. The on-board LED will indicate which mode you are in.
Molded EPP foam skirt offers superb durability when inevitably bumping into walls, doors, or sliding around outside. EPP’s anti-dent features will keep the foam skirt looking like-new long after you take it out of the box.
The rigid molded plastic of the main quad frame is extremely durable to take bumps and crashes. If you do end of cracking the frame, the removable and replaceable ducts make it easy to swap one out without having to replace the whole frame!
Conformal coated board and electronics make the hovercraft, and drone, splash proof! The Inductrix Switch hovercraft will float with ease and zip around on calm water without concern about the water below, even if it flips over!
Efficient airflow diversion in the EPP foam skirt and variable pillow control allow the Inductrix Switch to glide across multiple surfaces including carpet, concrete, asphalt, packed earth, and much more.
A circular rounded nose makes it difficult for to get stuck against a wall. Simply add left or right power, and the hovercraft rolls out to a controllable area.
In drone mode, any indoor space is your playground. Just pop the craft out and go.
Choose your LED color with simple stick commands straight from the transmitter, perfect for flying or scooting around with friends.
Optional FPV Camera
Dedicated mounting position on the front of the hovercraft and simple plug on the board is ready to host the optional FPV camera with On Screen Display.
Vital data such as battery voltage, video frequency and channel, run time, and call sign displayed right on your screen.
Change your video channel directly from the OSD, even on the stock MLP4 transmitter. From a Spektrum Gen.2 transmitter, channel and frequency can be selected in the video transmitter menu.
Everything you need right in the box including the transmitter, flight battery and charger.
Spektrum Ready DSMX protocol lets you use your existing Spektrum transmitter.
Kunder der har købt dette produkt har også købt