Mini Mamba V2 base frame kit fra Quadrysteria

Mini Mamba V2 base frame kit fra Quadrysteria

795,00 DKK 995,00 DKK

Mini Mamba V2 base frame kit fra Quadrysteria.

Kulfiberramme til opbygning af meget hurtig FPV Quadcopter.

• Shaft-to-shaft diagonal 270mm
• Completed frame weight 166 grams!
• Shaft-to-shaft width 200mm
Shaft-to-shaft length 184mm
• Body length 300mm
• All up weight: 505 grams with FPV gear, Mobius camera (no battery)
• Flight Controller mount slots accommodate 30mm - 45mm (hole center-to-center).

• Rotatable arms. You can angle the rotors forward 5-10 degrees and gain an aerodynamic advantage and speed during forward flight. This also gets you an optimal view of the horizon from your FPV camera.
• Full weave carbon fiber frame with integrated video transmitter bay, carbon fiber arm tubes, carbon fiber motor mounts and landing talons, and integrated video transmitter bay.
• CNC aluminum arm/motor clamps x 8 gold x 4 black
• Mobius Mount with 4 vibration damping balls for jello-free video
• CCD Camera Mount
• Build your own ARF bundle and save time!

•Top Frame Plate (twill carbon fiber)
•Bottom Frame Plate (twill carbon fiber)
•Battery Plate (twill carbon fiber)
•2 x arm tubes (twill carbon fiber)
•4 x motor mounts (twill carbon fiber)
•12 x arm clamps (silicon lined composite)
•4 x landing studs (M4 nylon - plastic caps)
•CCD camera mount (twill carbon fiber)
•Mobius camera mount (twill carbon fiber)
•Video transmitter bay cover (twill carbon fiber)
•Nylon standoffs and screws, hardware

Recommended Motors and ESCs (not included)
• 12Amp EMax SimonK ESCs
• EMax MT2204 - 2300KV
• Motor extension wires with heat shrink tube
• Optional power distribution board
• Battery power lead

Recommended FC and RC Gear (not included)
• Flip32, Flip32+ or CC3D
• 10cm female-to-female receiver leads
• Minimum 6 channel receiver
• Flight Controller Protective Cover
• Battery strap, velcro, zip ties

Recommended FPV gear (not included)
• 5.8GHz A/V Transmitter
• CCD 600TVL 2.8 - 3.6mm lens (IR block recommended)
• 5.8GHz Circular Polarized antenna pair (SkewPlanar/Airscrew, Cloverleaf, Mad Mushroom, Crosshair, SpiroNet Patch, Helical)
• For FPV, your own 5.8GHz A/V Receiver with video screen and/or goggles

Recommended Propellers (not included)
• 6" propellers or 2- or 3-blade 5" propellers

Required (not included)
• Battery: 3S LiPo 1300-1800mAh 30C minimum
• Your own RC transmitter (5 channel minimum)
• Battery charger

Titel Type Størrelse Download
Mini-Mamba-V2-byggetips.pdf PDF 463.95KB Download

Kunder der har købt dette produkt har også købt