Spændvidde: 1308 mm
Længde: 1260 mm
Vægt: Ca. 1510 - 1700 gram
Servoer installeret: 4 stk.
Motor installeret: 4250 børsteløs, 910 KV
Fartregulator installeret: 60 Ampere
Needed to Complete
Full-range, 4+ channel transmitter and receiver
2200–3200mAh 3S or 4S 11.1–14.8V LiPo with EC3™ or IC3™ Connector
Compatible LiPo charger
What's in the Box?
(1) E-flite Extra 300 1.3m PNP
(1) 60A ESC
(1) Brushless Outrunner Motor
(4) 23-gram Digital, Metal-Geared Servo
(1) Product Manual
Aileron: Dual servo control
Airfoil Shape: Fully Symmetrical
Approximate Assembly Time: 1-3 Hours
Approximate Flight Time: 4 minutes
CG (Center of Gravity): 90-100mm
Completion Level: Plug-N-Play
Control Throw - High (Ailerons): 50mm
Control Throw - High (Elevator): 60mm
Control Throw - High (Rudder): 100mm
Control Throw - Low (Ailerons): 38mm
Control Throw - Low (Elevator): 45mm
Control Throw - Low (Rudder): 70mm
Expo (Ailerons): 15% Low, 30% High
Expo (Elevator): 15% Low, 30% High
Expo (Rudder): 15% Low, 30% High
Landing Gear: Fixed main LG with steerable tail wheel
Minimum Required Radio: 4-channel
Minimum Speed Control: 60A included
Motor Size: 4250-910Kv Brushless
Propeller Size: 13x6E wooden
Recommended Motor Battery: 3-4S 2200 - 3200 mAhLiPo
Servos: Four 23g digital metal gear
Spinner Size: 53mm
Stabilizer Tube Length: 400mm
Stabilizer Tube OD: 6mm
Wing Area: 36.9 sq dm
Wing Loading: 40.9-46 g/sq dm
Wing Tube Length: 600mm
Wing Tube OD: 10mm
The full-scale Extra 300 delivers incredible aerobatic performance that offers virtually unlimited potential, which is why it’s been a game changer for nearly three decades now. Variants have been flown to first place finishes in a long list of competitions, including at a number of world championships. The E-flite® Extra 300 3D 1.3m model delivers unbelievable aerobatic and 3D capabilities while also being easy to fly when equipped with exclusive AS3X® and SAFE® Select technologies (BNF® Basic version only).
A scale replica of the world-renowned aerobatic champion
3S and 4S compatible 60A ESC and outrunner motor with wooden propeller
Fast and precise factory-installed digital, metal-geared servos with ball-link equipped linkages
Scale outline and details including a cockpit with instrument panel and pilot figure
Oversized control surfaces for maximum 3D aerobatic capability
Rugged landing gear with scale covers and wheel pants
Two-piece plug-in wings with carbon fiber wing tube
Magnetically-secured hatches provide convenient access to battery and electronics
Lightweight yet durable, composite-reinforced construction with EPO material
Factory-finished with a vivid paint scheme and bold graphics
The E-flite® Extra 300 3D 1.3m scale model offers nearly unlimited aerobatic and 3D performance potential–even beyond that of the full-scale design. Its fully-molded EPO airframe is composite reinforced for an outstanding blend of rigidity and durability while also being as lightweight as possible. Fast and precise factory-installed digital, metal-geared servos and ball-link equipped linkages drive the oversized control surfaces to deliver incredible 3D and precision flight capabilities. The 3S and 4S compatible power system features a 60-amp ESC that pairs perfectly with the outrunner motor equipped with a lightweight wooden propeller to deliver outstanding thrust and vertical performance, plus extremely crisp throttle response. So whether you fly it mild to hone your sport or precision aerobatic flight skills, or fly it wild to perform the most aggressive 3D maneuvers, the Extra 300 3D 1.3m will offer unexpected levels of capability and performance you’ll enjoy flight after flight.
This Plug-N-Play model comes with the motor, ESC and servos installed. All you need to do is complete some final assembly, install a receiver, charge a battery and fly!
The high-power brushless power system features a 60-amp ESC and an outrunner motor equipped with a lightweight wooden propeller that combine with a 3S or 4S 2200-3200mAh LiPo battery to deliver an abundance of beyond-scale power resulting in unlimited vertical performance.
In addition to the scale outline, this replica is also appointed with a clear canopy and a detailed cockpit that features an instrument panel and a painted pilot figure. Plus the durable landing gear is equipped with covers and wheel pants that add to the great looks and authentic scale appearance.
Construction with lightweight yet durable, composite-reinforced EPO material ensures the best possible flight performance while the factory-installed digital, metal-geared servos and ball-link equipped linkages deliver precise control of the oversized control surfaces whether you're performing sport, precision or aggressive 3D aerobatic maneuvers.