PowerBox iGyro inkl. SensorSwitch, GPS og USB. BESTILLINGSVARE.

PowerBox iGyro inkl. SensorSwitch, GPS og USB. BESTILLINGSVARE.

2.995,00 DKK

PowerBox iGyro inkl. SensorSwitch, GPS og USB interface.
Model/Varenr.: PB3510
Lagerstatus: Ikke på lager
The PowerBox iGyro SRS is a completely new type of gyro system intended for fixed-wing model aircraft. At the development stage our constant aim was to combine maximum versatility with simplicity of operation. The system incorporates 8 regulatory algorithm specificaly developed for fixed wing models, whlch causes hardly any alteratlon in the model's familiar flying characteristics; at the same time the aeroplane flies much more smoothly and accurately, and is less sensitive to unwanted weather-induced or aerodynamic influences. The need for mixers, such as elevator to rudder or flaps, is eliminated entirely. The iGyro exploits the latest servo bus tecnology to minimise the extremely complex wiring arrangements necessitated by previous gyro systems. The ability to assign any channel to the gain adjusters makes it possible to set up the desired gyro effect accurately in just one short flight. Independent adjustment of each of the five outputs is possible, enabling the modeller to set up gyro gain and direction of effect precisely. The separate GPS Sensor provides 8 means of obtaining 8 constant gyro effect over the model's ful speed range, effectively eliminating the problem of over-compensation leading to oscillation in high-speed flight The control system is based on menus displayed on the graphic OLED screen, which makes short work of all set-up tasks.


Extremely accurate triple-axis MEMS sensor
Special regulatory algorithm designed for fixed-wing model aircraft
Three-stage flight phase switching
Three axes distributed to five servos, each adjustable independently
GPS-regulated gyro gain
Integral delta mixer
Can be installed in any attitude
Graphic OLED screen with 128 x 64 pixels
Ultra-simple menu-controlled programming method using the SensorSwitch
SRS technology for use with various bus systems: Futaba S-Bus, Spektrum DSM2 / DSMX, HoTT, M-Link and Jeti
Unrestricted channel assignment (channel mapping)
Digital output can be passed on to an SRS PowerBox system
16-bit processor for fast, high-resolution signal processing
Settings can be stored on a PC and reloaded at any time
Can be updated using the PowerBox USB Interface Adapter
Robust aluminium case
Operating voltage: 4,0V - 9,0V
Current drain, iGyro: 51 mA
Current drain, GPS: approx. 60 mA
Maximum current: min. 10 A
Receiver: Two, using serial inputs
RC systems supported: DSM2 / DSMX, Futaba, HOTT, M-Link, Jeti
Gyro sensor type: MEMS
Number of sensor axes: 3
Gyro regulation modes: Heading mode, Normal mode
Channels: 18
Servo outputs: 5
Servo signal resolution: 0.5 µs
Servo frame rate: 18 ms
Screen: Graphic OLED, 128 x 64 pixels
Dimensions: 52 x 35 x 14 mm
Weight incl. GPS sensor: 50 g
Temperature range: -30°C to +75°C
EMV approval: EN 55014-1:2006
CE: 2004/108/EG

Kunder der har købt dette produkt har også købt