PowerBox Evoultion inkl. SensorSwitch

PowerBox Evoultion inkl. SensorSwitch

Udsolgt, skriv for bestilling.
PowerBox Evoultion inkl. SensorSwitch.
Model/Varenr.: PB4230
Double linear voltage stabilisation for receiver and servos, supplying 5.90 Volts
Power handling up to 2 x 10 Amps
For 7.4 Volt LiPo batteries (PowerBox Battery) or 5-cell NC or NiMH batteries
6 channels remotely accessed from the receiver
6 two-way signal amplifiers
16 servo sockets on the backer
Interference suppression for all 16 servo inputs (no ferrite rings required)
Independent IC-controlled voltage monitors (LED chains)
Two external ultra-bright warning LEDs
Minimum voltage memory (low voltage memory) for both batteries, can be read individually
Two integral electronic switches, controlled by the SensorSwitch
Operating voltage range 4.0 to 9.0 Volts
Temperature range -10° to +55° C
Voltage loss approx. 0.35 Volts
Current drain 25 mA
Weight only 115 grammes complete with all cables and SensorSwitch