Futaba R6308SBT, 8 kanals FASST HV modtager

Futaba R6308SBT, 8 kanals FASST HV modtager

Udsolgt, skriv for bestilling.
Futaba R6308SBT, 8 kanals FASST HV modtager.
Model/Varenr.: FPR6308SBT
Futaba modtager der passer sammen med FASST 2,4 GHz anlæg.

Kanaler: 8
Størrelse: 14,3 x 25 x 47 mm
Vægt: 13 gram
Rækkevidde: Fuld
Spænding: 3,7V til 7,4V
Antenne: 14 cm


Compact, lightweight 2.4 GHz FASST receiver with integral FASSTest telemetry transmitter, for transmitting model data back to the ground.

In spite of its small size the R6308SBT receiver features an integral FASSTest telemetry transmitter and can transmit a maximum of 32 telemetry data sets to the ground over a range of up to 1000 meters (3200ft).

Any existing FASST system can be converted to telemetry operation at any time by using an R6308SBT 2.4GHz FASST telemetry receiver.

Naturally the receiver is fitted with eight PWM outputs for conventional servos. The PWM outputs are switchable, so electively the channels 1 to 8 or 9 to 16 are available. Two receivers can be operated in parallel to provide sixteen PWM channels.

Channel 8 can be switched to S.Bus mode, so up to eighteen S.Bus servos or other devices can be connected to this output.

Devices or sensors can be connected via the S.Bus2 socket, and up to 32 telemetry data sets can be transmitted. If two receivers are employed, the number of telemetry channels rises to 64.

The receiver's integral transmitter sends telemetry data present at the S.Bus2 socket to the Telemetry-Box 2.4 GHz FASSTest (Item no. RF1666) by radio. The data are then displayed on the screen, or generated in the form of audible or speech output.

If a separate Wi-Fi Rx-Box 2.4 GHz FASSTest (Item no. RF1667) with integral FASSTest receiver module is used, the telemetry data can also or alternatively be transmitted to a smart-phone (Android, Apple), netbook, laptop, etc., and any monitor connected to that device.