EasyGlider 4 Kit

EasyGlider 4 Kit

Produktet er udsolgt.

745,00 DKK

EasyGlider 4 model i ELAPOR.
Model/Varenr.: 214332

Model beregnet til svæveflyvning eller indbygning af EL-motor som købes separat.

Tekniske data:
Spændevidde: 1800 mm
Længde: 1130 mm
Flyvevægt fra: 800 gram til 980 gram

Forslag til udstyr:
Servoer: 2 stk. HS-55 og 2 stk. HS-81
Forlængerledninger: 2 stk. 15cm, 2 stk. 30cm.
Motor setup: Multiplex #332672
Batteri: 2200mAh-3s LiPo
Lim: Zacki Elapor

The EasyGlider 4 is based on the popular and proven Easy-Glider and EasyGlider electric.
The EasyGlider 4 is designed for brushless outrunner motors and LiPo batteries, and a matching power set is available under # 33 2672.
The model’s flying characteristics are just right for the beginner, although this by no means implies that the more advanced pilot won’t enjoy it - quite the contrary. If you are an expert you will soon discover that the EasyGlider 4 behaves like a much bigger model, and its performance is also far better than you might expect.

Kit contents:
Moulded ELAPOR® parts, GRP spar, all plastic parts required to assemble the model, small items, linkage components, decal sheet, comprehensive, richly illustrated instructions.

■Low sink rate
■Can be ballasted to expand the airspeed range
■Landing aid - both ailerons raised
■Can be finished using any standard spray-can paints after prior treatment with MULTIprimer # 60 2700
■Pre-fabricated moulded ELAPOR® parts
■Convenient method of aileron servo connection when the wings are fitted

Kunder der har købt dette produkt har også købt