FunCub XL ND Radio Ready, model i Elapor.

FunCub XL ND Radio Ready, model i Elapor.

4.395,00 DKK

Model/Varenr.: 1-02052
Lagerstatus: 1 på lager

Du kan ikke gå til bestilling, da der er et produkt i din indkøbskurv som ikke er på lager. Gå til indkøbskurv


Ny udgave af den velkendte begyndermodel i skummaterialet Elapor som giver en stærk men let model.

Tekniske data:
Spændevidde: 1700 mm
Længde: 1200 mm
Flyvevægt fra: 2650 gram

Følgende udstyr medfølger:
Motor: Permax BL-O 4235-0480
ESC: 60Amp regulator
Servoer: 6 stk. HiTEC HS-225BB
Propel: 15 x 8

Følgende udstyr købes separat:
Batteri: LiPo 4000 mAh 6S
LiPo lader
Sender og modtager

Kan monteres med pontoner for start og landing på vand.

The new Funcub XL ND (NEW DESIGN) is the further development of our versatile and popular Funcub XL (multifunctional high-wing aerobatic towing aircraft).

Our goal was to lose weight and give it a fresh new look. We have implemented the weight savings by redesigning the chassis and the new EPP wheels, which saves around 200g in weight. This enables us to achieve an even lower airspeed and a better thrust-to-weight ratio. The tuning chassis (# 1-02061) can also be retrofitted to the existing Funcub Xl.

This also improves your outstanding short take-off and landing properties even further. Thus it can be used on almost any terrain. 

Like its predecessor, the new Funcub XL ND also has many beautiful details, such as the very elegant LED covers for the optional lighting with the POWER-MULTIlight (# 7 3030) - a real eye-catcher. It also has a standard tow release (additional servo HS-225 required for activation) and a large discharge chute for which a suitable parachutist (# 852004) is available.

Why is the FunCub XL so popular? She flies extremely precise and adult! We have given it large rudder flaps, a lot of power and very balanced flight characteristics, so that vertical climbs, aerobatics with knife flights, and even torque rolls are possible! Due to the weight savings of the XL ND, the flight performance is now increased again. The FunCub XL is characterized by extravagant construction solutions and sets completely new standards in its class. A remarkably strong fuselage thanks to "M-Frame technology", stable and lightweight carbon tubes (CFRP) in the wings, offset landing flaps and very easy and quick upgrade of the model - thanks to the bracing with quick-release fasteners.


• Kit with a high degree of prefabrication

• Pre-cut and already applied decal sheet

• Extremely precise and adult flight behavior

• Unbelievably large fun factor due to many additional functions

• Offset landing flaps for steep descents and short take-offs

• Off-road properties due to huge and light wheels made of EPP

• High-strength fuselage due to "M-Frame Technology "

• Strong and light carbon tubes (CFRP) in the wings

• Low minimum speed

• Suitable for towing sailors (eg Lentus / Alpina)

• Divided surfaces, making it easy to transport

• Powerful drive set (# 33 2610)

Scope of delivery ELAPOR® model 95% completely built, including drive motor Permax BL-O 4235-0480,

controller MULTIcont BL-60 SD, propeller 15x8 ", 6 servos Hitec HS-225BB,

applied decoration and detailed instructions.


Model character: powered flight

models Material: Elapor

Level: 3 advanced

Wingspan in mm: 1700

RC functions: SR / HR / QR / motor / option landing flaps and tow coupling Flight

weight, electric in grams: 2650

Flight time in minutes: 6

Total surface loading g per square meter: 53

total area in qdm: 50

battery types / cells: 6S LiPo

construction time in min .: 25